Gauge panels, Race Receivers, switches, tachometers
Item # QRP56-110Tape Measure; 10 ft Length; 1/4in Width; Magnetic Back; Inch, Each
Item # KEV-K70016" Impact Wrench Lug Nut Socket Extension
6 Point Socket so it won't damage lug nuts
1/2" Drive with detent hole for use with impact Wrenches
Neon Orange Powder-coat finish
Item # KEV-K7001-1212" Impact Wrench Lug Nut Socket Extension
6 Point Socket so it won't damage lug nuts
1/2" Drive with detent hole for use with impact Wrenches
Neon Orange Powder-coat finish
Item # CIR-LW77580Integrated 1" hex socket"; Smooth center handle rotates freely; Rubber hand grips on outer handles
Item # JOE32307Tire Pressure Gauge; Analog; Economy; 5-60 psi; 1lb increments; 2-1/2in Diameter-White/ Glow in the Dark Face
Item # ALL44076Tire Pressure Gauge- 0-20 PSI; Analog; 2in Diameter; White Face; 1/2lb Increments
Item # LON 52-45220Fitting Adapter; 90 Degree, 4 AN Male to 1/8in NPT Male; Steel- Zinc Oxide, Each
Item # WIL260-9921Brake Shutoff Valve; 12V Remote Control; 1/8in NPT Female Ports
*This valve can be used as a brake shut-off. When energized, the valve will block pressure from reaching downstream. The valve does not prevent fluid from returning to the master cylinder. This eliminates the possibility of trapping pressure when activating the valve.
*Requires a 12 Volt, 5 amp (recommended) fused power source through a toggle switch. Warning: Not a line lock assembly. **Not for street use.
Item # TC-861200Brake Shut-off Valve; 12V Remote Control; 1/8in NPT Female Ports; Each
**Electric solenoid instantly shuts-off right front brake for improved corner entry handling and changing track conditions Racers want every advantage possible. The TCI Electric Brake Shut-Off allows the driver to electrically shut-off the right front brake caliper to enhance corner entry handling in dirt, circle track racing applications. The easy-to-install solenoid mounts directly into the brake line, anywhere between the master cylinder and caliper. A flip of the switch from the inside of the car by the driver activates the lightweight 6061-T6 aluminum encased, continuous duty solenoid. This high-quality solenoid blocks fluid flow to the right front caliper, eliminating the common push or tight condition experienced under corner entry braking. The TCI Electric Brake Shut-Off features a compact solenoid design so it can be discretely mounted, regardless of your application. The heavy-duty solenoid handles up to 3000psi and incorporates a waterproof seal to handle frequent high-pressure washings.