Building Products

Small Screw-In Ball Joint; Taper: 1-1/2"/ft; Stud Stock Length; Non-Take Apart
Interchangeable w/ products: MOOG- K772; HOWE-22320; TRW-10162

Small Bolt-In Ball Joint; Taper: 2"/ft; Stud Stock Length; Non-Take Apart
Interchangeable w/ products: MOOG- K5208; HOWE- 22302; TRW-10268

Large Bolt-In
Taper: 2"/ft
Stud 3/8" Longer than Stock
Non-Take Apart
Pro-Tek ball joints provide a great, economic solution to get the car back on the track.

For IMCA modifieds and street stocks. Fits most racing upper a-ams. Large bolt-in with 2" taper. 3/8" longer than stock stud used to raise roll center.

Interchange Part Numbers:

Moog K6136
Howe 22301
TRW 10269

Ball Joint, Greaseable, Lower, Press-In, Hardware Included, GM A-Body / F-Body / X-Body 1964-74

Small Bolt-In; Taper: 2"/ft; Stud Stock Length; Non-Take Apart

Ball Joint, Greaseable, Lower, Weld-In, Low Friction, 2.180 in OD

Small Bolt-In; Taper: 2"/ft; Greaseable; Low Friction; Hardware Included.
Interchangeable w/ products: MOOG- K5208; HOWE- 22302; TRW-10268.

Ball Joint- Precision; Take-A-Part, Greaseable, Upper- Bolt-In; Low Friction; 2.040in/ft Taper, 3.36in Stud; 1/2-20in Thread; Hardware Included; Aluminum Cap- Black Anodized

• Master Ring and Pinion Gear Installation Kit
• GM 7.5" 10-Bolt
• Kit Includes Koyo Bearings, Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound