Building Products

1-1/2" OD; Red- Medium; Sold Individually
Hammond Motorsports Pull Bar Bushings are designed for HMS Pull Bars. Available in 4 color options from softest to hardest: Blue, Green, Red, White

1-1/2" OD; White- Hard; Sold Individually
Hammond Motorsports Pull Bar Bushings are designed for HMS Pull Bars. Available in 4 color options from softest to hardest: Blue, Green, Red, White

HMS Pro Series Pull Bar is a 6 biscuits bar, custom built with 4 on the acceleration side and 2 on the braking side of pull bar. Easy to adjust the preload, long lasting biscuits. This pull bar comes with two blue, two green, and two red bushings.

Some of the upgrades that Hammond Motorsports has done is FK Teflon rod ends , Swift ground stainless steel shafts , machining shaft to housing bushings , made holder to use in holding of the pull bar to take apart or rebuild with, do a brake in of bushings beforehand , dyno all bars , made the windows on housing smaller to keep dirt out.

Made in the U.S.A.

The HMS Quick Change Pull Bar Plates will locate your pull bar from 2" to 5" in front of the axle tube center line. Includes all bolts and spacers needed. Also, check out the add-on Pull Bar Adjuster, HMS-PBA (sold separately).

The HMS Pull Bar Adjuster can be used for rear end housing or the HMS Driveshaft loop / Pull bar mount. Simply loosen the jam nuts and set screw and then adjust side to side without removing the pull bar bolt.

This pull bar adjuster works great with the Hammond Motorsports 9 inch Ford Pull Bar Mount Kit, HMS-1009M.

Made in the U.S.A.

The Hammond Motorsports Double Drop Complete Tie Rod is an all-steel tie rod with ends that measures a minimum of 19” from rod end to inner tie rod stud. This double drop complete tie rod gives you extra frame clearance, keeping your steering from binding and reducing the chance for bent steering components when the car rolls hard when cornering. Versions of this complete tie rod are available for the left or right side.

Includes: tie rod, 5/8” heim rod end, inner tie rod end, and two jam nuts.

Made in the U.S.A.

The Hammond Motorsports Double Drop Complete Tie Rod is an all-steel tie rod with ends that measures a minimum of 19” from rod end to inner tie rod stud. This double drop complete tie rod gives you extra frame clearance, keeping your steering from binding and reducing the chance for bent steering components when the car rolls hard when cornering. Versions of this complete tie rod are available for the left or right side.

Includes: tie rod, 5/8” heim rod end, inner tie rod end, and two jam nuts.

8Made in the U.S.A.8

The HMS complete caster/camber gauge kit with case works on stock spindles and fabricated spindles.

KIT INCLUDES:
Caster Gauge Housing
Intercomp Angle Finder
(5) Adapters
Carrying Case

Bolt-on Battery Box; includes hold down hardware; Steel
11" L x 7-1/4" W x 6" H